As pointed out to me on the older Cruising Concepts site, screws for the retrofit windows kits are still shown. They are no longer used and have been updated with a newer sealant used by Catalina Yachts. I know some of you still like the idea of the screws but eliminating them gets rid of …
Tag Archives: Companionway Doors
LOCKS FOR COMPANIONWAY DOORS
While keyed and combination cam locks for entry ways with rotating arms for Companionway doors are popular none under a $100 wholesale cost are made of all stainless steel. In spite of claims otherwise the internal lock mechanism is made out of steel and zinc. It turns out that only the trim ring outside maybe …
CATALINA 400 COMPANIONWAY DOORS
Companionway Doors One of the features that we really liked on my folks Catalina 36, were the teak companionway doors that they had made. While at the Seattle boat show this winter, we ran into the same gentleman who made those doors and asked him to make some for Legacy. He has a website at …
BENETEAU COMPANIONWAY DOOR UPGRADE
Mike – – The first picture is the original companionway door on our Beneteau Limited Edition 37. The door was easy getting in but when it was shut, getting out was very difficult. The second picture is the completed installation of the new doors. Your doors are well built, nice looking and make it very …
DIFFERENCES IN WORKMANSHIP DESIGN AND PRACTICES
I like to talk about workmanship practices, quality of materials, and design philosophy. Under workmanship practices all hinge flaps and screws are hidden except the barrel of the hinge. Hidden hinges denote an elegant approach to any construction by caring about your technique and installation. And yes it costs more. The aesthetic gain is well …
Continue reading “DIFFERENCES IN WORKMANSHIP DESIGN AND PRACTICES”
KEEPING UP
There is no doubt that keeping up on only custom installations from Companionway Doors to exotic inlay in tables makes it difficult to supply in a time frame that you would normally expect from items on the shelf. Then again that is said with a slight of hand with respect to trying to fill all …
KEEPING UP
There is no doubt that keeping up on only custom installations from Companionway Doors to exotic inlay in tables makes it difficult to supply in a time frame that you would normally expect from items on the shelf. Then again that is said with a slight of hand with respect to trying to fill all …
OIL FINISHES FOR TEAK
In preparing for oil finishes I use Daly’s Seafin “Ship N Shore” penetrating oil before any other finishing. After sanding I apply a soaking coat and wait 30 minutes before applying a second coat. The first coat is usually absorbed entirely. The second coat sits on the surface mostly and makes sure that all areas …
FINISHING TEAK PART 1.5
Finishing teak will be discussed next after the applications of Ship N Shore. First the sealing coats must be dry. This is easily detected with the palm of the hand touching the wood surface. If the first impression is a coolness to the touch then it can go another day of drying. The assumption is …
TABLES FOR THE INTERIOR
Mike,Table arrived this morning,we set it up last night and it looks beautiful! It’s the perfect fit! It actually fits better than we expected,and my wife is really happy with it. Thank you! You did a beautiful job!The checks in the mail,(where have I heard that before?)I took photos this morning and ill send them …
